|
 |
|
|
|
|
|
|
Designed for video and audio professionals, the SGM-2X comes with 2 barrels
that effectively change the pick-up pattern of the microphone.
With the short barrel the SGM-2X works as a sensitive omni-directional
microphone. By attaching the supplied long barrel the SGM-2X becomes a directional supercardioid
shotgun microphone. This narrow or directional pattern rejects side and back noise and lets you focus
in on your subject. In either configuration the SGM-2X exhibits a wide frequency
response and low noise levels.
The SGM-2X has a balanced XLR output and will work in any low impedance microphone
input of 1K ohm or less. This includes balanced XLR or unbalanced º" and 3.5mm microphone
inputs. Due to the wide variety of possible connections and equipment used with the
SGM-2X, an output cable is not supplied.
The SGM-2X is supplied with a shock-mount holder. This holder can be used on a camera
shoe or on a microphone stand.
FEATURES
8 1/8" omni barrel and extension barrel to make it a 16" super-cardioid
Low noise (-70db)
Wide bandwidth (40Hz-20kHz)
Balanced low impedance (680 ohm) XLR output
Switchable low-cut filter
Integrated shockmount attaches to camera shoe or mic stand
Plug into the 41XT transmitter to make a wireless shotgun mic
Includes 2 foam windscreens
1 "AAA" battery lasts approx. 1000 hours
TECHNICAL
Frequency Response: 40-20,000Hz
Low-Cut Roll-Off: 6dB/Octave @ 200Hz
Sensitivity:
Super Cardioid: -39dB re 1V/Pa
Omni-directional: -45dB re 1V/Pa
Impedance: 680 Ohms @ 1Khz
Max. SPL Input Level: 110dB
Signal to Noise Ratio: 70dB
Dynamic Range: 85dB
Battery Type: AAA (1.5V) - use alkaline battery
Battery Current: 0.2mA
Battery Life: 1000 Hours w/Alkaline Battery
Weight w/o Battery:
Long + Short Barrel: 6.5oz (185 grams)
Short Barrel: 3.9oz (110 grams)
Dimensions:
Long + Short Barrel: 16" (400mm) length, 0.83" (21mm) diameter
Short Barrel: 8.4" (212.5mm) length, 0.83" (21mm) diameter
Output Type: 3-Pin XLR type
SUPPLIED ACCESSORIES
Shock mount mic holder
2 Windscreens
|
