|
 |
|
|
The SGM-1X is a directional super-cardioid shotgun microphone with a wide
frequency response and low noise levels.
The SGM-1X has a balanced XLR output and will work in any low impedance microphone
input of 1K ohm or less. This includes balanced XLR or unbalanced 1/4" and 3.5mm microphone
inputs. Due to the wide variety of possible connections and equipment used with the
SGM-1X, an output cable is not supplied.
The SGM-1X comes with a windscreen and shock-mount holder with integrated shoe-mount.
This holder can be used on a camera shoe or on a microphone stand.
The SGM-1X is perfect for the XL-1, XL-1S, PD-150, PD-170 and similar DV camcorders.
FEATURES
11.8" super-cardioid
Low noise (-65db)
Wide bandwidth (80Hz-18kHz)
Balanced low impedance (680 ohm) XLR output
Switchable low-cut filter
Integrated shockmount attaches to camera shoe or mic stand
Plug into the 41XT transmitter to make a wireless shotgun mic
Includes foam windscreen
1 "AAA" battery lasts approx. 1000 hours
TECHNICAL
Frequency Response: 80-18,000Hz
Sensitivity: Super Cardioid -41dB re 1V/Pa
Impedance: 680 Ohms @ 1Khz
Max. SPL Input Level: 110dB
Signal to Noise Ratio: 65dB
Dynamic Range: 80dB
Battery Type: AAA (1.5V) - use alkaline battery
Battery Current: 0.2mA
Battery Life: 1000 Hours w/alkaline battery
Weight w/o Battery: 4.76oz (135grams)
Dimensions: 11.8" (300mm) length, 0.83" (21mm) diameter
Output Type: 3-Pin XLR type
SUPPLIED ACCESSORIES
Shock mount mic holder
Windscreen
|
